YakUI

[Yakar]

YakUI 1.33b
(game version 1.33 compatible)




One year ago on 31.12.2008 the first beta of YakUI (http://www.warhammeralliance.com/forums/showpost.php?p=3129037&postcount=1410) was released (screenshot (http://foto.arcor-online.net/palb/alben/18/3693518/1440_6438303935633033.jpg)). Imo this is worth another release/update today :)If you are using YakUI 1.33a, YakUI 1.32b, or YakUI 1.32b RC1, you can just update to YakUI 1.33b and all of your settings (keybindings, YakUI AND all other addons supplied) will remain the same. So you don't need to set up the whole UI again.






news:

- rework on the buff-frames. most important: player, defensive and offensive target get a display for guard.
please see this (http://img192.imageshack.us/img192/2420/yakui133bdaocbuffdispla.jpg) chart how the buffs/debuffs are displayed.
- prereleased version of the new groupspotter / healer check this out!

- optional size increase of the morale cooldown display on the moralebar. (way better to see the cooldown)
- actionbar texture: 4 modes - gloss, plain, analog and disabled (standard action bars)
also the texture doesn't reappear after zoning.
- groupframes and groupicons will keep their state (hide/show) when zoning.


supplied addons:
- the new version ofc brings all available updates to the supplied addons.






resolutions:
1920x1200, 1920x1080, 1680x1050, 1600x1200, 1440x900, 1360x768, 1280x1024
note: this custom ui is optimized for 1920x1200. all other resolutions are manual transformations based on it.



screenshots:
1 (http://img682.imageshack.us/img682/737/admyra038.jpg) 2 (http://foto.arcor-online.net/palb/alben/18/3693518/1440_3038623663343030.jpg) 3 (http://img11.imageshack.us/img11/1681/yakani001.jpg) 4 (http://img145.imageshack.us/img145/7561/admyra011.jpg) 5 (http://img682.imageshack.us/img682/4338/admyra012.jpg) 6 (http://img94.imageshack.us/img94/8059/irakay001.jpg)



video:
sometimes words are not enough, so i created a simple
video to support the installation advices listed below:
YakUI - additional visual installation guide (http://www.youtube.com/watch?v=0H2-VyY-4M4)
(use HD and full screen mode)








download (http://www.mediafire.com/file/zwodzkjxo2t/YakUI%201.33b.zip)
alternate download (http://www.filefactory.com/file/a0885b5/n/YakUI1.32b.zip)






installation:


exit the game!
create a backup of your old ui: go to your warhammer installation folder and backup both subfolders \user and \interface!
delete old interface: this is absolutely required! if you don't delete your old ui, files might get mixed up leading to very nasty errors that can barely be diagnosed. so delete both folders \user and \interface from your client.
copy YakUI-files from the downloaded archive subfolder "YakUI 1.33b" to your client. those 2 folders ( \interface & \user ) will take the place of those you have deleted before.
now start the game and logon a character. with the first logon (and with every first time logon of a char that doesn't have YakUI installed yet) an on-screen guide will be displayed that will help you to setup YakUI.

just...
READ THE ON-SCREEN DISPLAYS!

NOTE: YOU WILL MOST LIKELY HAVE TO CHANGE THE UI SCALE BEFORE IMPORTING THE PROFILE!!! THIS CAN BE DONE IN THE FIRST WINDOW THAT APPEARS BY CLICKING ON THE LABEL IN THE RIGHT CORNER! IF THE LABEL TURN GREEN, THERE IS A PROFILE FOR THAT SCALING AVAILABLE! IN THE LEFT CORNER THE CURRENT RESOLUTION IS DISPLAYED. CLICK ON IT TO GET TO THE SETTINGS WINDOW TO CHANGE RESOLUTION, IF NEEDED. AFTER IMPORT THE UI WILL TRY TO LOG OFF. THIS IS A NESSESSARY STEP TO COMPLETE INSTALLATION. IF YOU DISRUPT THAT LOGOFF ACCIDENTLY, JUST DO IT MANUALLY, BUT DIRECTLY AFTER THE IMPORT!!!







updating YakUI:
users of YakUI 1.33a, YakUI1.32b and YakUI 1.32b (RC1) can update their YakUI without deleting their profiles. just go to your client directory and replace only the interface folder:


exit the game!
create a backup of your old ui: go to your warhammer installation folder and backup both subfolders \user and \interface!
delete the following folder from your warhammer client: \interface
copy only the \interface folder from the downloaded archive subfolder "YakUI 1.33b" to your client. it will take the place of the deleted files.
now start the game and logon one of your characters. YakUI will briefly accounce that it has been updated to YakUI 1.33b and the First Steps will appear again.

NOTE: THE UPDATE WON'T WORK WITH ANY OTHER YakUI VERSION THAN 1.32b, 1.33a or 1.32b RC1!!! ALSO UPDATING WON'T REPOSITION FRAMES OR ALTER SETTINGS TO YOUR ADDONS.

so if you are having problems with addons, i strongly suggest to reinstall the ui. pay special attention to the textboxes before and while the profile import! also viewing the video might be helpful.





-----------------------------------------------------------------


post release fixes:


02.01.2010:
if you are having problems that the moraleCD doesn't scale (increased size) after logon, download the fixed yakui.lua (http://www.mediafire.com/file/a12hly1ejlu/yakui.lua) and replace your yakui.lua in the folder \interface\addons\yakui\ with the new one. download links have been updated and include the fix.



----------------------------------------------------------------


special thanks:

Crestor, always helpful with tipps on coding stuff and ofc for the great daocbuff.
Phlakez, that came up with the idea to seperate guard and odjira buffs (added to the additional buff-frames in yakui)
all moders that supply the community with their addons!
all people that gave me input to improve yakui :-)




----------------------------------------------------------------



happy new year
yak

[Fraith]

This is nice, well done.

[Marieclaire]

You are my hero! Thank you!

[Yolos]

Greetings Yakar.

I have just spent the last half hour making the old UI work with 1680x1050 and there's now a new version? LoL. I'll probably download this version and start over but am here to ask one question. What is the UI element for the flag icon that lets you queue for scenarios? I can't find it.

If you would, please let me know the name of the element. I'm thinking that its probably hidden below and I can't see it. So, if you could provide a set of coordinates I could change in whatever settings file so I could see it long enough to move it, that's be great!

Loving the UI. Just have to tweak it now so it works for me.

Thanks.

[Yakar]

hi Yolos,

the warhammer symbol that you use to que scenarios and when you are inside a scenario to display the scenario sumboard, is a part of zMinimap (folder is interface\addons\zmm)
Look for ScenarioSummaryWindow() in the core.lua.

regards
yak

[Zock]

I love it, you did a very good job here, I only got one problem tho. I can't use your resolution and so the "boxes" where the chat, action bars etc should be in gets really small and so it all gets messy tbh, mind telling me how I can adjust the "boxes"?

Thanks again

[Yakar]

I love it, you did a very good job here, I only got one problem tho. I can't use your resolution and so the "boxes" where the chat, action bars etc should be in gets really small and so it all gets messy tbh, mind telling me how I can adjust the "boxes"?

Thanks again

hi zock,

the panels are hidden in the standard ui editor so the rest is not so messed up ;)
type /lemmie to the chat and reactivate all xpanel elements and they will appear in the ui editor again and you can move/resize them. for a more accurate fine tunning after the basic changes i would recommend to use /xpanels and alter the position and size.
note: every panel element (bottom right, left, center, upper left) consist of 2 xpanels frames. One is the border and the other one is the transperence part.

regards
Yak

[Zock]

Thank you Yakar!

I love this, you have officially made my day hehe :D

Keep it up

[Tolil]

Very nice! :)

[Zock]

Ok I have tried to customize it as good is I can but it looks like I don't have it in me.

I look forward to when you release the smaller version, I will go back to the default layout until then.

Any knows time on the smaller release? no pressure at all just wondering cos I cant wait :D

[Yakar]

Any knows time on the smaller release? no pressure at all just wondering cos I cant wait :D

right now i'm working on the panel layout. here is an impression what i'm doing right now.
http://foto.arcor-online.net/palb/alben/18/3693518/1920_3766333830393563.jpg
i use a screenshot from my secret ui-mod toon *g* and start with some reference lines.
i can't say how long it will take, but i guess i'll finish the panels this evening :)

[Zock]

right know i'm working on the panel layout. here is an impression what i'm doing right now.
http://foto.arcor-online.net/palb/alben/18/3693518/1920_3766333830393563.jpg
i use a screenshot from my secret ui-mod toon *g* and start with some reference lines.
i can't say how long it will take, but i guess i'll finish the panels this evening :)

That soon? great I thought it would take weeks hihi :P

cant wait

[Soot Iron Rock]

Great job, thanks so much!

[frznd0g]

Just like to say love the UI one question though at the top-right where the PQ info is displayed how do you make it where you can see the progression bar as well, the only thing that it shows now is the info on how many mobs to kill and so forth for that current PQ. Thanks

[Yakar]

Just like to say love the UI one question though at the top-right where the PQ info is displayed how do you make it where you can see the progression bar as well, the only thing that it shows now is the info on how many mobs to kill and so forth for that current PQ. Thanks

my ui-testclient is currently in use for the 1680x1050 version, but i guess that the addon HideInfluence is hiding this bar. you may try to delete it from the \interface\addons folder and reload the ui.

That soon? great I thought it would take weeks hihi :P

cant wait

hey, it may take some time! there is ALWAYS something not working as intended :P
so i won't give you a deadline. but if things work out well, i may give you a betaversion pretty soon.

[Athais]

gife betaversion xD great work ;)

[Yakar]

i finished the 1680x1050 beta :-)

screenshot (http://foto.arcor-online.net/palb/alben/18/3693518/1920_3531333764663539.jpg)

download (http://files.filefront.com/YakUI+10zip/;13091941;/fileinfo.html)

please report any issues, since i didn't test it so long.

[Athais]

thank you so much for this fantastic ui ;)

[Yolos]

hi yak.

That worked. Thanks.

Now I have a new problem. My loot window has disappeared. I cannot loot. On my chat screen, I'm seeing CN: DEBUG: Begin : Id~=0, RollChoice ~= Invalid.

Any clues?

[Jyminka]

Thanks for the UI! Taught me a lot :)

I messed around with some settings, and I also made some new texture files based off of yours using: these (http://redheadstock.deviantart.com/art/Swirls-Flourishes-II-Brushes-58498278) and these (http://getfirefox.deviantart.com/art/Splatter-Brushes-45042105).

Here's a ss:

Warband (http://i564.photobucket.com/albums/ss83/Jyminka/?action=view&current=Llyth_003.jpg)

No Warband (http://s564.photobucket.com/albums/ss83/Jyminka/?action=view&current=Llyth_004.jpg)

[Yakar]

does anyone else have problems with LOOT ROLLS?

hi yak.

That worked. Thanks.

Now I have a new problem. My loot window has disappeared. I cannot loot. On my chat screen, I'm seeing CN: DEBUG: Begin : Id~=0, RollChoice ~= Invalid.

Any clues?

hm, you should check the cabal need & greed settings. type /cn and it will display the settings. yakui is set to auto-chose in rvr and user input at pve.
if you can't get a clue what causes the problem, i would suggest to delete \user\interface\AllCharacters\CNeed and then reloadui. this will create a new settings file for cabal need & greed which hopefully fixes the problem (remember to edit the settings after that!). if that doesn't work, i would delete the whole addon (del folders: \interface\addons\CNeed & \user\interface\AllCharacters\CNeed) and then you may chose to reinstall it from curse, or just leave it uninstalled and roll in rvr. sorry for the troube :-(



Thanks for the UI! Taught me a lot :)

I messed around with some settings, and I also made some new texture files based off of yours using: these (http://redheadstock.deviantart.com/art/Swirls-Flourishes-II-Brushes-58498278) and these (http://getfirefox.deviantart.com/art/Splatter-Brushes-45042105).

Here's a ss:

Warband (http://i564.photobucket.com/albums/ss83/Jyminka/?action=view&current=Llyth_003.jpg)

No Warband (http://s564.photobucket.com/albums/ss83/Jyminka/?action=view&current=Llyth_004.jpg)

sweet! it really pleases me when my ui encourage ppl to do their own ui! and the result is a little bit yakui with a lot of Jyminka in it. really good! :-)

[Zock]

:o your the most hardworking UI maker ever!

Thank you for this

[Falcon554]

Love the ui but I cant find the join group or open group button other then that it rocks :)

[Drakis]

The button for granted abilities (zealot marks and whatnot) is waaaaaaay off-screen. Can't move it or reset it as far as I can tell without doing a full restore defaults and painfully moving everything back into place :(

[AmigoJuan]

whats the lowest resolution this UI can run in?

[Yolos]

hm, you should check the cabal need & greed settings. type /cn and it will display the settings. yakui is set to auto-chose in rvr and user input at pve.
if you can't get a clue what causes the problem, i would suggest to delete \user\interface\AllCharacters\CNeed and then reloadui. this will create a new settings file for cabal need & greed which hopefully fixes the problem (remember to edit the settings after that!). if that doesn't work, i would delete the whole addon (del folders: \interface\addons\CNeed & \user\interface\AllCharacters\CNeed) and then you may chose to reinstall it from curse, or just leave it uninstalled and roll in rvr. sorry for the troube :-(



Hi. I tried totally uninstalling Cabal and I still can't get a loot window whenever someone else in group loots. The others see it, but I don't. It appears whenever I open loot. I put in a ticket but was hoping you could perhaps think of anything else.

Another question is where is the PQ influence meter? I can't see it in this UI. Is it available?

[Yolos]

Not sure what happened, but looks like I have the Loot window back. I still have a question regarding PQ Influence meter. Where can I find this info in your UI?

[Yakar]

Hi Yolos,

good to hear, that your loot problem seems to be ok now. Cneed is the only addon in my ui that directly interacts with the lootframe, and tbh i was running out of advice to this issue :D

concerning the influencebar. there is an addon in my ui, that hides it. it's called "hideinfluence" :rolleyes: so you may go to <warhammer install>\interface and <warhammer install>\user and delete this addons folders in it, reloadui and influencebars should be back on screen.

cheers
yak

[Yakar]

The button for granted abilities (zealot marks and whatnot) is waaaaaaay off-screen. Can't move it or reset it as far as I can tell without doing a full restore defaults and painfully moving everything back into place :(


Love the ui but I cant find the join group or open group button other then that it rocks :)


i'll have a look at this topics this evening :)

[Marsares]

Hey Yakar,

Installed your UI and loving it... exactly what I wanted. One question though, and I'm probably being very thick here, but I can't for the life of me find the button that shows you the available WB's in your area. Where is it?

Cheerio!

[Yakar]

whats the lowest resolution this UI can run in?

1920x1200 and 1680x1050 are the currently supported formats, 1280x1024 in the near future. i'm not planning to do any other resolutions than these because it is a lot of work tbh.

Hey Yakar,

Installed your UI and loving it... exactly what I wanted. One question though, and I'm probably being very thick here, but I can't for the life of me find the button that shows you the available WB's in your area. Where is it?

Cheerio!

i'll have a look at this topic this evening ;)

[Skurm]

Hats off to you sir, this is a great compilation. Using it now :D

[Vendom]

one of these days I will get a widescreen monintor.. but until then its 1280x1024 for me.
Will probably mess around on my own using your original res, but if you are making one for 1280x1024 I would be very interested to see how that turns out!

[Yakar]

one of these days I will get a widescreen monintor.. but until then its 1280x1024 for me.
Will probably mess around on my own using your original res, but if you are making one for 1280x1024 I would be very interested to see how that turns out!

well, i do have to change the layout, so it will look a little different than the widescreen versions. what do you think of a layout like this: http://foto.arcor-online.net/palb/alben/18/3693518/1920_3637623733623461.jpg
or maybe you have any suggestions?


__________________________________________________ ______________________


Love the ui but I cant find the join group or open group button other then that it rocks :)

fixed with v1.01 - you can now enable the „granted abilities“ window in the ea layout editor. And you can enable the open party button by typing /phantom and set the check mark. (also see new readme with screenshots)

The button for granted abilities (zealot marks and whatnot) is waaaaaaay off-screen. Can't move it or reset it as far as I can tell without doing a full restore defaults and painfully moving everything back into place :(


fixed with v1.01 - you can now enable the „granted abilities“ window in the ea layout editor. And you can enable the open party button by typing /phantom and set the check mark. (also see new readme with screenshots)

Hey Yakar,

Installed your UI and loving it... exactly what I wanted. One question though, and I'm probably being very thick here, but I can't for the life of me find the button that shows you the available WB's in your area. Where is it?

Cheerio!

fixed with v1.01 - you can now enable the „granted abilities“ window in the ea layout editor. And you can enable the open party button by typing /phantom and set the check mark. (also see new readme with screenshots)

reported issues with the german client and waaaghbar

hopefully fixed with the newer version of waaaghbar_RealmStatus i applied with v1.01. still waiting for a responce to verify this ;)


here the link for the new version:
YakUI 1.01 (http://files.filefront.com/YakUI+101zip/;13101888;/fileinfo.html)

[Zando]

Thanks, great work!

[Vendom]

well, i do have to change the layout, so it will look a little different than the widescreen versions. what do you think of a layout like this: http://foto.arcor-online.net/palb/alben/18/3693518/1920_3637623733623461.jpg
or maybe you have any suggestions?


I do like that setup, I tend to like to use squared with verticle group myself so I like the look of that setup. With some xPanel windows behind it I think that would look pretty snazzy for us widescreen impaired folks :D

[Stringray13]

I LOVE this UI, but there is one glaring problem. I do not know if it is on my end
or what, but here it is:

After I set my hotkeys, which are all very basic drag and drop to the hotbars, no macros etc... All is well until I die or log out. When I log back on or pop up at bind, the hotbuttons are all gone...BUT

When I open my ability book and start to drag and drop, they all reappear.

This means every time I die in RVR (Not a lot, I am a DoK and I sing 'Cant Touch This' when I play) I have to open the ability book and clicky to get my hotbuttons back.

If anyone can help me I promise to make you my defenisive target, or not my offensive one, and I will plead to Khaine that you are allowed to live if only to tell your allies to flee.

Again, thank you so much for your efforts on this, I cannot express how much more efficient a system this is, and the original was still great. You must do something of this nature for a living.

[wetwilly92]

Sweet UI,

Question though. Right now I play on a 1360x768 (I think that's right) widescreen, so A lot of the xPanels are offscreen. Was wondering if there's a quick way to move them into a visible area (The position buttons in the /xpanels gui is quite mediocre) ?

Also, Is there a way to get each of the action bars to scale evenly when I downsize them to fit into the xPanel for the action bars?

[Malanr]

Which is the mod or piece of a mod that gave/gives you the little hot bar on the right with all your potions on it seperate from the main hotbars ?

Playing as a SM with PlanB and its rotating hotbars having enough space for all the abilities and potions is a pita , a floating potion bar or even better a potion belt similar to say a Diablo style look would be great and this seems to have something like that in the screenshots.

[Sharuk]

Sweet UI,

Question though. Right now I play on a 1360x768 (I think that's right) widescreen, so A lot of the xPanels are offscreen. Was wondering if there's a quick way to move them into a visible area (The position buttons in the /xpanels gui is quite mediocre) ?

Also, Is there a way to get each of the action bars to scale evenly when I downsize them to fit into the xPanel for the action bars?

AFAIK you can draw em in the Layout Editor using /lemmie to register them there =)

[freche]

I have tried to do something similar with xpanels and waaaghbar, however my panel overlap (is above) the waaaghbar. How did you manage to put the Bar above the panels ?

[Rhissa]

Very nice pack, testing and customizing it right now.

Some things I've already changed, testing them right now:
- It seems Window Cleaner can be deleted, Phantom can do everything WindowCleaner does and more
- I think there is no need for both, LibCareerDB and LibTargetInfo, both do the same and HUDUF can use both. I've deleted LibCareerDB as it seems to be older and less maintained
- I've replaced HealAll with FastInteract (http://war.curse.com/downloads/war-addons/details/fastinteract.aspx)
- I've replaced ItemRack (+ Selector) and MoraleSet with Equipment Sets (http://war.curse.com/downloads/war-addons/details/equip-sets.aspx), as I usually change equipment, morale and tactic sets alltogether. This mod does it all with one click only.

Some suggestions for addional useful, but unobtrusive mods:
- Anywhere Trainer (http://war.curse.com/downloads/war-addons/details/anywheretrainer.aspx)
- Crafting Willard (http://war.curse.com/downloads/war-addons/details/craftingwillard.aspx) and Crafting Info Tooltip (http://war.curse.com/downloads/war-addons/details/craftvaluetip.aspx)
- Objective Tracker (http://war.curse.com/downloads/war-addons/details/objtracker.aspx)

[Yolos]

Hey Yakar,

Installed your UI and loving it... exactly what I wanted. One question though, and I'm probably being very thick here, but I can't for the life of me find the button that shows you the available WB's in your area. Where is it?

Cheerio!

Target yourself and right click your name. You should see options in there for open parties.

[Marieclaire]

i see lots of work to do :) ;)

[Ghorr]

It is really awesome!


and is it possible to implement this one:

http://war.curseforge.com/projects/opw/

If yes, could someone tell me how - please?

[Marieclaire]

Target yourself and right click your name. You should see options in there for open parties.

maybe this could help you

[AshaneFB]

Has anyone gotten this to work with stance based characters, ala Shadow Warrior / etc?

Stance bar isnt under 'granted' abilities, its another section which seems to be missing now.

[AshaneFB]

nm on the above.

For anyone else who has this problem, its the layout config mod that is being used.

Type /lemmie and right click the EA Stance Bar, then reload the UI. You should see it now in the layout list, unhide it. It will appear at the very bottom right of your screen (you'll have to move a few things to get too it). Its also extremely small, so a bit hard to click.... move it where you want and resize it appropriately.

[Mysticon]

liked this ui pack. anyone tested it whit a sh?

going to try it, but i think im going to change abit on it. anyway, thanks for uploading this:)

[Yakar]

hi folks :)

soooorry, i'm on business trip in munich till friday and don't have a client at hand, nor do i have time to look into this :-/ i'll answer your questions, etc. as soon as possible (most likely friday evening)


just a short statement: open party window is hidden, but you can enable it with phantom, granted abilites window is also hidden, but you can enable it in the ea layout editor.
i modified waaaghbar a bit to have it a higher layer than the panels. i can tell you how to do it on the weekend.
thank you for the addon advice, i'll look into it and most likely will apply it in the next version of YakUI (if it's working properly)
I won't apply beta stuff though, feel free to do so for yourself of course.

cheers from munich
yak

[Mysticon]

thanks again for this great ui, even look bether when installed then on your pictures, tho i have some questions or wishes.

first off i found out that im running the game at 1650 x 1050 so its not "perfect" for me.

when it comes to you ui back its some things i didnt like:

*The hotbar is to small for me, i use key on most of my skills but i like to click on some of em, and since they are framed in i cant realy change the size on em whitout messing our the ui. this might be the biggest problem so far.

* Realy didnt like the hot keys changeses, like when i hit "G" to check who was online in my guild i used "Run away" and jumped into a champ and died:p not a big problem to fix but worth telling:)

*Also planing on rolling choppa soon (i hope) and then i whould whant the xp bar back in the top of the screen, is there a easy way to do that?

* realy liked the look of your ui pack, it is clean and nice. but its not buildt for pet classes. when i summoned my pet i couldnt find a nice place to move the pet bar and the other pet icons.

* looks like the chat window is abit to small or something.

All in all im happy whit the ui pack, my only problem is the size on the hotbar, i now its to much to ask for you to scale it up. but if you decided to do so its not much that are needed. decided to add a pic so it whould be easyer to see.

http://i27.photobucket.com/albums/c166/MysticoN/Draci_023.jpg

wel anyway, im off tobed now, whil test it more when i get up:)

[Stringray13]

After removing and reinstalling the UI, I was able to retain my action bars through death, but then the window positions would not stay where I moved them. Not sure what is going on, but it does not seem to save one form of data or another.

Could use tips on this, if anyone knows what may cause this.

Thanks!

[Rancor]

Great UI, exactly what I was looking to assemble myself! I noticed the scale seemed weird and lo and behold! I had mucked my scale settings up! It looks great now!

The only thing I can't wrap my head around are the keybindings and getting them to fit with my G13.

Anyone know of a bar mod that lets you name the buttons? I tried sticky and I think that is what I am looking for but could not get it to work with :rolleyes: NAMBLA :rolleyes:....

I've also lost the ability to right click a target to bring up a menu, tho it works from the group window.

Any commands to change my health bar from grey to green? the Hate for my BG is red so not sure why by health is grey :=)

Thanks for the UI!

[Claraden]

I using 1280X1024 resolution and tried to resize all the panels but it'll take days for me just to perfect it. So I'll pray for Yakar to make a 1280X1024 version >_<

[Mysticon]

i know that its to much to ask for to get a personal made ui, but is it posible to get a copy where you have deleted the box whit the hotbars are in and the little box below hotbars?

That whould be perfect and i whould be for ever gratefull, if its not to much work.

anyone else that have problem whit the chat box, and text that are streching out of the chatbox?

[Marieclaire]

i know that its to much to ask for to get a personal made ui, but is it posible to get a copy where you have deleted the box whit the hotbars are in and the little box below hotbars?

That whould be perfect and i whould be for ever gratefull, if its not to much work.

anyone else that have problem whit the chat box, and text that are streching out of the chatbox?


I´m not sure, what you exactly want, but i guess you mean the customized xpanels. You can find them in your Warhammer Folder/Interface/addons/xpanels_customtextures/panelborderc.tga and panelc.tga. The "little box" is connected to the middle frame, so be careful editing this can mess things up.

Depending your chatbox problem: You have to resize your chatwindow, so it fits into the xpanel frame.

Hope i could help you, Marieclaire

[Flatcat]

Might be just me or the time of the day but the Filefront site seems superslow, I can't even load the page to get to the file download.


EDIT: I was finally able to get on the site and get the file. Just installed it and it looks pretty sweet by default!!

[Marieclaire]

Alternative Download Source: http://ui.ashitaka.de/down/YakUI_1.01.zip

[Mysticon]

I´m not sure, what you exactly want, but i guess you mean the customized xpanels. You can find them in your Warhammer Folder/Interface/addons/xpanels_customtextures/panelborderc.tga and panelc.tga. The "little box" is connected to the middle frame, so be careful editing this can mess things up.

Depending your chatbox problem: You have to resize your chatwindow, so it fits into the xpanel frame.

Hope i could help you, Marieclaire

so its only me that have the chat problem? might fix it if i "re installl" the ui.

yeah, the hotbars are bit to small for my taste, and i cant realy change the size on em due to the clean ui whitout messing it up.

Been in the xpanel folder, but tbh thats not my strong side so i hoped to get some help:) you think its alot of work to remove those 2 boxes? the one around the hotbars and the small one below? or maby someone can post a little guide how to do it?

[Marieclaire]

so its only me that have the chat problem? might fix it if i "re installl" the ui.

yeah, the hotbars are bit to small for my taste, and i cant realy change the size on em due to the clean ui whitout messing it up.

Been in the xpanel folder, but tbh thats not my strong side so i hoped to get some help:) you think its alot of work to remove those 2 boxes? the one around the hotbars and the small one below? or maby someone can post a little guide how to do it?

Chatproblem: You can simply fix it by rightclicking on the chatwindow and detach it. Then you might have some sort of triangle on the right upper edge. Just click and move it to resize the chatwindow.

Regarding the xpanels, there could be 2 ways to solve this (i´m not ingame, so not sure). First you can remove those boxes ingame by writing /xpanels in your chatbox. A configuration box will appear and there you should delete those panels. You can also type /lemmie into the chat, point to the PanelC and PanelC Border. There should be a function to disable addon parts.

cheers, Marieclaire

[Mysticon]

thanks, whil try it when i get home.

[Mysticon]

might be to tired to see it my self, but what hotbar addon is used in this pack? deleted vertigo but still its something that changes the hotbars.

wel, im to tired to mess whit this now. allready messed it up once and had to re install the ui:p and got one critical error:p

[Aiiane]

Deleting Vertigo doesn't change anything; Vertigo is merely a tool used to adjust settings, it's not what's actually making the bars appear like they do. You'd need to reset your bar layout (by deleting the EASystem_ActionBarClusterManager folder in WAR\user\interface\allcharacters) to fully reset the bars.

[Mysticon]

thanks for all the help

[zewsan]

I really like the mod, except that i still want the original partyframe/own charframe/target/friendly target.
Easier when healing, seeing pets etc, since i mostly play in a 2 player party.

How do i get them back, but keep the grid frame down right for scenarios/warbands?

[AshaneFB]

I really like the mod, except that i still want the original partyframe/own charframe/target/friendly target.
Easier when healing, seeing pets etc, since i mostly play in a 2 player party.

How do i get them back, but keep the grid frame down right for scenarios/warbands?

Should be /phantom, then unhide them.

[Yakar]

back from munich! thanks to all those people, who gave advice while i was away /cheer


I LOVE this UI, but there is one glaring problem. I do not know if it is on my end
or what, but here it is:

After I set my hotkeys, which are all very basic drag and drop to the hotbars, no macros etc... All is well until I die or log out.

have you been able to fix this? honestly i don't have a clue what triggers this strange behaviour :-(

I have tried to do something similar with xpanels and waaaghbar, however my panel overlap (is above) the waaaghbar. How did you manage to put the Bar above the panels ?

Open the waaaghbar.xml (for example with the notepad) and look out for the following line:

<Window name="WaaaghBarOne" inherits="EA_Window_Default" movable="false" layer="background" savesettings="true">

change the layer="background" to layer="default":

<Window name="WaaaghBarOne" inherits="EA_Window_Default" movable="false" layer="default" savesettings="true">

repeat this with WaaaghBarTwo

Very nice pack, testing and customizing it right now.


hi rhissa :) i answered your pm already. i'll look into your suggestions and most likely will apply them to the next version

Target yourself and right click your name. You should see options in there for open parties.

...or use YakUI 1.01 and enter /phantom. set the mark at "open party button" and the button will appear in the ui.

i see lots of work to do

true... :mad:

It is really awesome!
and is it possible to implement this one:
http://war.curseforge.com/projects/opw/
If yes, could someone tell me how - please?

hm, this is "just an alpha for devsharing atm", so i won't apply this atm. if it gets a final release, i'll have a look at it. You may try this for yourself, if you like. with yakui you can add as many addons as you like to improve your game. you just install them regularly and they will appear in your ui.


For anyone else who has this problem, its the layout config mod that is being used.

Type /lemmie and right click the EA Stance Bar, then reload the UI. You should see it now in the layout list, unhide it. It will appear at the very bottom right of your screen (you'll have to move a few things to get too it). Its also extremely small, so a bit hard to click.... move it where you want and resize it appropriately.

my bad! since i wanted to have a clear ea frame editor, i disabled everything i didn't need. I'll enable this in the future versions; for now please follow this little work around from AshaneFB.


*The hotbar is to small for me, i use key on most of my skills but i like to click on some of em, and since they are framed in i cant realy change the size on em whitout messing our the ui. this might be the biggest problem so far.

scaling the hotbars is really a lot of work, if you also want the panels to fit.
maybe you can get around by deleting the central panels (panelborderc.tga and panelc.tga : \interface\addons\xPanels_CustomTextures) and rearrange the bars?


* Realy didnt like the hot keys changeses, like when i hit "G" to check who was online in my guild i used "Run away" and jumped into a champ and died. not a big problem to fix but worth telling:)

just use the keybinding menu :P i also gave a short table which hotbutton belongs to each bar in the readme.pdf


*Also planing on rolling choppa soon (i hope) and then i whould whant the xp bar back in the top of the screen, is there a easy way to do that?

jepp, use /lemmie to enable the xp bar in the ea layout editor and then resize it, move it and show it with the layout editor.


realy liked the look of your ui pack, it is clean and nice. but its not buildt for pet classes. when i summoned my pet i couldnt find a nice place to move the pet bar and the other pet icons.

i'm not playing a pet class tbh. maybe i can get some info and rearrange this in the future.


looks like the chat window is abit to small or something.

it helps to turn off the timestaps, also other users reported, that resizing the chatframe solved this issue. to do this, rightclick in the chatframe and unlock it. now you can resize it with this little triangle in the topright corner of the chatframe.


wel anyway, im off tobed now, whil test it more when i get up:)

:>


I've also lost the ability to right click a target to bring up a menu, tho it works from the group window.

are you using yakui 1.01? anyway, type /huduf and then chose the FTHP bar under the edit bars. press edit! in the FTHP options press the button "general". set a mark at "friendly" in the "interactive" part of that menu. this should help :)

Any commands to change my health bar from grey to green? the Hate for my BG is red so not sure why by health is grey :=)

green? that scares me :-( ok, seriously... this can be configured with huduf too. goto PlayerHP in the edit bars selection. press edit! then press the color button and play around with the settings (trigger red to "0").

So I'll pray for Yakar to make a 1280X1024 version >_<

most likely this weekend :)

[Gizbit]

Any chance of a 1440x900 version of this UI? Looks awesome!

[Claraden]

Ah, no rush Yakar, I know it's quite tedious to customize frames like that.

-and thanks a lot for the fast reply

[flushed]

Is there a way I could make the textures stay the same size but just lower the UI scale? Like now when I lower the scale - it drops the texture frame down too. I don't want the texture frames scale down :(

[AshaneFB]

Yak,

Another thing to fix (and anyone who has this mod) is the CombatModLog being broken.

AFAIK its not being updated anymore, and with 1.1 its not refreshing correctly like it should. (Example, you'll notice when you install the pack, it has Yak's characters on it)

The workaround is a edit to a file inside the directory called 'combatlog', and modify the /Dependencies line, with this:

<Dependencies>
<Dependency name="EA_QuestTrackerWindow" />
<Dependency name="EA_ChatWindow" />
</Dependencies >

(The file will likely be classified as a MOV file in Vista/etc.. just use notepad to open)

So, go to your WAR directory/interface/addons/combatlog, then edit that file with the above, save, and your done.

You may need to re-enable the program by typing /cl show (I believe it is, /cl will get you the options for it)

[Yakar]

thanks for the work around :)

anyway, combatlog will be replaced with tortall dps in the next version.

[zewsan]

Should be /phantom, then unhide them.

Seems they are hidden somewhere else, i tried phantom, and it works to get back other buttons, but not the party/self frames.

Could it be hidden somewhere else too?
I reloaded UI, and they just wont appear :cry:

[Nerror]

Great addon suite there. :)

I am running 1600x900 in windowed, so I made some changes to the panels and switched out a few addons, and added others. I am still in the process of tweaking stuff like fonts and colors and some of the layout, but it's mostly ready.

However, one thing bugs me: I want the influence bar, so I removed the HideInfluence addon, and while the influence bar is showing again, I lost the ability to click the influence bar to open the tome of knowledge page. How do I fix that?

[Dimitrius]

I love this UI...thanks!

Quick question, it may have been covered but I missed it. If you have a pet class how do you get the pet icon to allow you to change aggressive/defensive/passive as well as the button to get rid of your pet?

[AshaneFB]

For the pet, that should be career resources.

Type /lem, and make sure Career Resources is drawing. (Right click if it says no, and it will be), exit that and go to your config UI screen, and it should be in your windows section, but hidden. (unhide it)

Pretty sure that will do it.

Zewsan, gimmie a bit and I'll figure out the action frames if Yak dosent before me :)

//Edit// Zewsan, found them.

Make sure they are checked in Phantom (first for the frames, 2nd for the buffs/debuffs with the frames).

Then enter your UI config, and they are hidden... unhide them in the "Windows" section. They will appear at the very bottom right hand of your screen. Very hard to spot!

Move them up.

It looks like anything Yak turned off, was moved to the bottom right as a hidden storage place.. Stance Bar was in the same location.

[AshaneFB]

However, one thing bugs me: I want the influence bar, so I removed the HideInfluence addon, and while the influence bar is showing again, I lost the ability to click the influence bar to open the tome of knowledge page. How do I fix that?

I did two things, and I'm not sure if the first helped solve the issue or not, but I know the second did. (So try the second, and if dosent, go do the first, ka?)

Remove hideinfluence from interface & user both was the first step.

Second, it still woudnt let me click on it, so I simply resized it a bit bigger (odd I know) and it worked suddenly.

I believe it was just a issue of resizing it for whatever odd reason. Try it and let me know.

Further testing shows it has to be pretty large to actually click on, like "default size" large, not smaller... not sure why that is?

//Ok, my last edit, I promise//

Its odd, the influence bar will simply not be clickable in certain positions of the UI. Near the center? Fine. Top right? No. Near the potion bar? Sometimes, if you click on the far right side (last two dots of influence bar), etc... its almost a position issue and I dont know why, sorry..

Least you can get it to work in certain positions :)

[Dimitrius]

For the pet, that should be career resources.

Type /lem, and make sure Career Resources is drawing. (Right click if it says no, and it will be), exit that and go to your config UI screen, and it should be in your windows section, but hidden. (unhide it)

Pretty sure that will do it.

Zewsan, gimmie a bit and I'll figure out the action frames if Yak dosent before me :)

//Edit// Zewsan, found them.

Make sure they are checked in Phantom (first for the frames, 2nd for the buffs/debuffs with the frames).

Then enter your UI config, and they are hidden... unhide them in the "Windows" section. They will appear at the very bottom right hand of your screen. Very hard to spot!

Move them up.

It looks like anything Yak turned off, was moved to the bottom right as a hidden storage place.. Stance Bar was in the same location.

Thank you...it was drawing but I had it hidden in the windows section...thank you for fixing my brain freeze :P

[Soot Iron Rock]

Sweet, I cant wait for the next version that includes tortalls, just because that addon is so usefull. Why did you get rid of epeen though? That was the addon that showed the top five in your scenario for whatever catagory you had selected. Oh, and is the new version going to be available in multiple resolutions?

[zewsan]

Thanks! Got the groups working :)

But i ran into another issue.

Everything else is perfect on all my chars, except the Squig guy.
For one, the petbar and squig control is placed under the actionbars, not a big deal tho.
The only thing i did, was to move a bar, move them up, but now, the top 2 actionbars + Bar 4 (the small one on right) dissapear randomly.
They come back at times after death, or reloadui.

I havent touched Bar 4 at all, so i have no clue how it can do that.

[Malanr]

Sorry to ask again, but the questions scroll past so fast. I've seen it in a few places and again in your ss, where you have a small hot bar with just a few squares which most people use for potions. What is the mod that lets you have just a little floating hot bar of a few squares ? Is that Vertigo ?

As a SM you use PlanB to rotate hotbars 1,2,3 through your balance states and I use a stacked 2 bar layout so the top bar rotates and the bottom bar has all your non-balance related moves. I don't need another whole hotbar visible but could use some more potion spots.

[AshaneFB]

Thanks! Got the groups working :)

But i ran into another issue.

Everything else is perfect on all my chars, except the Squig guy.
For one, the petbar and squig control is placed under the actionbars, not a big deal tho.
The only thing i did, was to move a bar, move them up, but now, the top 2 actionbars + Bar 4 (the small one on right) dissapear randomly.
They come back at times after death, or reloadui.

I havent touched Bar 4 at all, so i have no clue how it can do that.

Same happens to me... I havent really researched it much.

I'll see what I can figure out tonight, since it is a bit of a annoyance. (Attempting to drag a skill, or whatever makes it go active again, but yeah)

[Nerror]

I did two things, and I'm not sure if the first helped solve the issue or not, but I know the second did. (So try the second, and if dosent, go do the first, ka?)

Remove hideinfluence from interface & user both was the first step.

Second, it still woudnt let me click on it, so I simply resized it a bit bigger (odd I know) and it worked suddenly.

I believe it was just a issue of resizing it for whatever odd reason. Try it and let me know.

Further testing shows it has to be pretty large to actually click on, like "default size" large, not smaller... not sure why that is?

//Ok, my last edit, I promise//

Its odd, the influence bar will simply not be clickable in certain positions of the UI. Near the center? Fine. Top right? No. Near the potion bar? Sometimes, if you click on the far right side (last two dots of influence bar), etc... its almost a position issue and I dont know why, sorry..

Least you can get it to work in certain positions :)

Ok thanks. :)

Since I couldn't get the bar where I wanted and still be clickable, I simply enabled the waaaghbar inf instead and placed it in the upper panel before the realm status, and used /xpanels to prolong PanelU.

For those who prefer Tortall's mods, it's just a matter of adding them and removing the CombatLog mod. Works fine for me.

[AshaneFB]

I simply cannot figure out why the 3rd action bar is fading out. I've searched through all the mods that are effecting the bar and nothing.

Think I'm stumped here.... it only seems to happen (after testing it for a few hours) when the stance bar & career resource bar (either/or) are turned on and visible.

What the heck difference would that make I've got no clue.

[zewsan]

I havent found how to fix it either, but for some reason 2 of the bars stopped turning invisible, middle and bar4 on the right, now only the top actionbar does that.

I thought it might hide itself behind the textures or something, but cant seem to click where the buttons are supposed to be either.

The only thing that is changed, when the other 2 bars dont dissapear anymore, is that i added more actions to them.
Might be that the top bar thinks that its empty for some reason, it has 3 assigned buttons sofar, ill try to fill it with actions later and see if it also sticks.

Oh, and another small issue. I removed the "Hideinfluence" mod catalogs a while ago, and the influence bar is visible, but not clickable like standard. Tried moving it around on the screen, but not working.

[MadSquare]

There is one thing i still wonder about because i like the idea, but i keep failing to take it over.
How did you get the class icon over the border of the healthbars?
is it actually not over the bars border and you used a custom textur that with 0 alpha at its sides?

Answer would be nice.
greetz, Square.

[AshaneFB]

Oh, and another small issue. I removed the "Hideinfluence" mod catalogs a while ago, and the influence bar is visible, but not clickable like standard. Tried moving it around on the screen, but not working.

Answered that one above.

Its very tricky and something is still interfering with the bar. First make the bar larger, then move it around. I've found at the top right, cant click. bottom right (near the potion bar) cant click either.. but at the top right, slightly lower (about a half inch or so down, and a half inch out from the right) you can click it.

[Sorrow]

I really love this UI, but I do not play with one of the default resolutions. I play in 2560x1600. Would you mind adding a small section to your FAQ with a quick summary of how to resize/move things that cannot be moved with the 'u' functions in game.

I suspect that it may be xpanel, but am not sure. If someone could at least point me in the right direction of which mod to read the info on to move stuff, I would appreciate it.

[toboardornot2]

i much agree with the person above me. i play on my laptop at 1440x900, how can i resize things to fit?

[Sorrow]

OK, figured it out. Really the stuff I had to move and resize was xpanels.

So, here's the next question: I set cneed to manual for a couple of the switches. I never saw a loot window come up at all after that. Is the loot window disabled in this UI, and, if so, how do I re-enable it?

[Starbuck]

Would love a 1440*900 version as well :)

[wrajjt]

Heya.

Great UI, after a small bit of customizing I have it set up just like I would want it... atleast I thought so. Suddenly one day when I logged in, the open parties button is nowhere to be seen anymore. I know I had it out before, since I hade to move it from it's orginal position to a better one. Any idea of how to make it appear again? I reaaally dont want to re-install the whole UI, as customizing it took a couple of hours :|

[Eendje]

im really happy with this UI but can you please tell me how i can resize the barsize? i noticed bar 4's scale is smaller than the other bars.

[flushed]

To resize the windows, you're going to have to register them in Lemmie. To do this type /lemmie and you'll see a window pop-up with a list of windows, once you have that open make sure the window you want to move is registered to Draw as-in "YES" is selected under the Draw option ( Here's a pic: http://i43.tinypic.com/2lj243q.jpg ). To make it Draw, just right click on the YES/No in the options. Now once you have it set to the size you want you can reverse it again to not draw it so it's not in the way if you move other stuff around. Any window that's set to draw but it's not showing, just right click the window and select "Show". Hope this helps.

Also a side note, the background windows are the windows listed as Xpanels_XXXX..ect since those are the one most people are wanting to resize.

[Dredger]

Hey Yak. Is there a way to change the colors of the Huduf target bars? The health/ ap bars in the middle are gray is there anyway to change them to be the green/yellow bars? I have trouble seeing the line on the gray.

[Sorrow]

Hey Yak. Is there a way to change the colors of the Huduf target bars? The health/ ap bars in the middle are gray is there anyway to change them to be the green/yellow bars? I have trouble seeing the line on the gray.

If you use /huduf it will bring up the bar templates. There are a number of different premade bar skins in there to select from.

One of the things I learned about setting this UI up yesterday is not to treat it as a single, global UI. You are better off remembering that it is a bunch of other component UIs, merged to look cool and work effectively. Once you figure which one you're dealing with, look up how to tweak that one, and away you go.

[Yakar]

preview pics :>

1.02
1 (http://foto.arcor-online.net/palb/alben/18/3693518/1920_6331326162313564.jpg)

1.02 at 1280x1024
1 (http://foto.arcor-online.net/palb/alben/18/3693518/1920_3661653738643661.jpg) 2 (http://foto.arcor-online.net/palb/alben/18/3693518/1920_6361346339383662.jpg)

got to write the readme and test a bit more to finish 1.02



p.s.: 1.02 will include some fixes to the problems mentioned above since my last post :)

[Stringray13]

preview pics :>

1.02
1 (http://foto.arcor-online.net/palb/alben/18/3693518/1920_6331326162313564.jpg)

1.02 at 1280x1024
1 (http://foto.arcor-online.net/palb/alben/18/3693518/1920_3661653738643661.jpg) 2 (http://foto.arcor-online.net/palb/alben/18/3693518/1920_6361346339383662.jpg)

got to write the readme and test a bit more to finish 1.02

Looking great! By the way, my buttons resetting that I posted above, I fixed by deleting the User and Interface folders, and reinstalling all of it. Not sure what was messed up there, but it is working great now. Cant wait til 1.02!

[Yakar]

Any chance of a 1440x900 version of this UI? Looks awesome!

edit: damn! i just wanted to start a 1440x900 version, but my gpu doesn't support this format oO in order to have good looking texture for xpanels, it is nessecary to create them specific to the resolution and i can't run it. =/
does someone want to pick up this topic? i can supply advice, basic textures etc.

Is there a way I could make the textures stay the same size but just lower the UI scale? Like now when I lower the scale - it drops the texture frame down too. I don't want the texture frames scale down

no, probably in the 1.2 version of the game, but with the current warhammer version scaling is EVIL! :P

i tried phantom, and it works to get back other buttons, but not the party/self frames.

i'll take this question to explain some things that changed in yakui 1.02.
1.: in older version the addon windowcleaner was still active which causes problems when phantom was also active. i got rid of windowcleaner; hopefully this will fix some problems.
2.: i found some fixes for stupid buttons and bars moving around and resizing all the time.
3.: stance bar, granted abilities, open party button and career bar are all visible by default in 1.02. if you want to hide them, you'll find a short description how to do this in the readme.pdf

I want the influence bar, so I removed the HideInfluence addon, and while the influence bar is showing again, I lost the ability to click the influence bar to open the tome of knowledge page. How do I fix that?

this happened, because i raised the layer level of the waaaghbar1 (the top bar, wgb2 is at the bottom) from background to default so it is above the xpanels. yakui 1.02 does no longer use the waaaghbar 1 and therefor i changed the layerlevel back to "background". as a side-result the influencebar is clickable again.

how do you get the pet icon to allow you to change aggressive/defensive/passive as well as the button to get rid of your pet?

i don't play a petclass =( so if someone has some advice to make yakui better fit to their needs, please contact me. but your specific problem is solved with v1.02, beacuse the career resource window is now visible by default. you may need to resize it though...

Why did you get rid of epeen though?

because melee healers suck! :P i'll add it to the "optional addons" though. i used this most of the time to see how many enemy healers there are in the scenario and who needs some "special treatment" from my dd's *g* i'm still looking for an addon, that has more options (for example "only show enemy players")

What is the mod that lets you have just a little floating hot bar of a few squares ? Is that Vertigo ?

i use the 4 bars layout and alter the 4th bar with vertigo to it's smaller size and fewer buttons. thoguh, most people use autobar (http://war.curse.com/downloads/war-addons/details/autobar.aspx), but autobar does not support hotkeys =/

I simply cannot figure out why the 3rd action bar is fading out.

i never had this problem yet. hopefully 1.02 will fix it as well!
btw.: thank you for supporting others while i was away. i have a project in munich and it even expanded 1 week, so i won't be around from sunday till next weekend =/

How did you get the class icon over the border of the healthbars? is it actually not over the bars border and you used a custom textur that with 0 alpha at its sides?

i just played a little with the huduf config. there was no special trick, or a different texture or something like this.
my options for player icon:
player hp options -> icons -> Career Ability Icon
show = true ; scale = 1.100 ; point = left ; rel. point = center

I play in 2560x1600.

nice =) can you upload a screenshot?

[AshaneFB]

i never had this problem yet. hopefully 1.02 will fix it as well!
btw.: thank you for supporting others while i was away. i have a project in munich and it even expanded 1 week, so i won't be around from sunday till next weekend =/


I think it triggers when you move a button off a bar onto another bar.. then zone/die/wait and it'll fade.

Also, no problem, its a very beautiful UI and deserves all the help it can get, you did a excellent job on it in my opinion! :)

[Yakar]

YakUI 1.02 (http://files.filefront.com/YakUI+102zip/;13232422;/fileinfo.html)




screenshots:
1 (http://foto.arcor-online.net/palb/alben/18/3693518/1920_3733363464656464.jpg) (16:10), 2 (http://foto.arcor-online.net/palb/alben/18/3693518/1920_6361346339383662.jpg) (4:3)


ChangeLog 1.02

- 1280x1024 resolution now available
- added the following addons: AnywhereTrainer, CraftingWillard, CraftValueTip, Kwestor, ResTell, TargetRing
- "State of Realm" replaces "Realmstatus"
- "Tortall's DPS" replaces "CombatLog"
- "open party button", "granted abilities", "career resources" and "stancebar" are now visible by default


---------

edit: link fixed

[Claraden]

Eh, I don't think the download link has been updated with the new version yet.

-The below link takes you to the new version, until the download link is updated.

http://postdownload.filefront.com/13231941//d3b4182f36faedc49304aac1204181fd23c212470ea1d92128 b116fe68f0e949f7175e10fabc9736

[zewsan]

Not sure if its mentioned, but (havent tried v1.2 yet), but the chat is laggy when typing in scenarios.

Never has this issue before. You type something, and in the start of the SC, i dont see it at all, but others see it.
But after a while, you type, and after 10-15 secs it shows.

What is causing the slowdown of the chat?
Gonna have to uninstall the chatmods since its just too annoying.

[Yakar]

http://postdownload.filefront.com/1... (http://postdownload.filefront.com/13231941//d3b4182f36faedc49304aac1204181fd23c212470ea1d92128 b116fe68f0e949f7175e10fabc9736)

some files got mixed up, please use the fixed link in my post above or at the first page ;)

[Yakar]

ok, download fixed :)

[Yakar]

What is causing the slowdown of the chat?
Gonna have to uninstall the chatmods since its just too annoying.

that normally only happened when the message had more than one line. one way to fix it, is to turn off the timestamps (they should be set to "off" in yakui 1.02)

[Wok]

Will this UI work if you are using the maximum allowed action bars from the default UI? From looking at the screen you don't have many action bars there and I don't know if mine would fit.

[Yakar]

Will this UI work if you are using the maximum allowed action bars from the default UI? From looking at the screen you don't have many action bars there and I don't know if mine would fit.

This UI will change your actionbars to 3 mainbars with 11 buttons each and a little extra bar with 6 buttons - anyway, you should set your keybindings and spells to the bars after installing the UI, so it's up to you to decide if you like that bar setup, or not.

[AshaneFB]

this happened, because i raised the layer level of the waaaghbar1 (the top bar, wgb2 is at the bottom) from background to default so it is above the xpanels. yakui 1.02 does no longer use the waaaghbar 1 and therefor i changed the layerlevel back to "background". as a side-result the influencebar is clickable again.


Anyway you can tell us how to do that?

I really cant update to 1.2 as I've spent countless hours tweaking it exactly to where I want it, so really dont want to start over :P

Only glaring issue is that bar being unlickable because of waaghbar.

[Melongod]

could i possibly get instructions to show all 5 action bars fully?

(i bind 3 of them and would like to click two...)

thanks!

[Marrow]

To resize the windows, you're going to have to register them in Lemmie. To do this type /lemmie and you'll see a window pop-up with a list of windows, once you have that open make sure the window you want to move is registered to Draw as-in "YES" is selected under the Draw option ( Here's a pic: http://i43.tinypic.com/2lj243q.jpg ). To make it Draw, just right click on the YES/No in the options. Now once you have it set to the size you want you can reverse it again to not draw it so it's not in the way if you move other stuff around. Any window that's set to draw but it's not showing, just right click the window and select "Show". Hope this helps.

Also a side note, the background windows are the windows listed as Xpanels_XXXX..ect since those are the one most people are wanting to resize.

Hey flushed, hopefully you'll read this, or perhaps someone else can get me on the right direction.

I noticed you have the icons of the classes in your warband boxes. A feature which YAK didn't include. Allthough I love the rest of the setup of this UI, I really would like to know who is what class in my warband/party/scen party.

So can anyone tell me which addon is used? Or if flushed would be so nice to zip up his UI and upload it somewhere?

Thanks a bunch already!

M.

[AshaneFB]

Hey flushed, hopefully you'll read this, or perhaps someone else can get me on the right direction.

I noticed you have the icons of the classes in your warband boxes. A feature which YAK didn't include. Allthough I love the rest of the setup of this UI, I really would like to know who is what class in my warband/party/scen party.

So can anyone tell me which addon is used? Or if flushed would be so nice to zip up his UI and upload it somewhere?

Thanks a bunch already!

M.

That's a function of squared. It will add the icons if you wish.

/sqr in game.

[wetwilly92]

Any Chance of a 1350x768 resolution version? :D

[Yakar]

Anyway you can tell us how to do that?

I really cant update to 1.2 as I've spent countless hours tweaking it exactly to where I want it, so really dont want to start over :P

Only glaring issue is that bar being unlickable because of waaghbar.

look into the waaghbar.xml and there for a line with function blabla waaaghbarONE in it (i don't have a client at hand, so i can't tell you the exact wording... you will find it!^^)
in this line is also layer="default". change this to layer="background". save the xml and /reloadui - done :)

[AshaneFB]

look into the waaghbar.xml and there for a line with function blabla waaaghbarONE in it (i don't have a client at hand, so i can't tell you the exact wording... you will find it!^^)
in this line is also layer="default". change this to layer="background". save the xml and /reloadui - done :)

Ahh that's where it is :D

Thank you!

[Marrow]

That's a function of squared. It will add the icons if you wish.

/sqr in game.

As I was looking closely at it, I recognised Squared in it, but still didn't have any clue, so thanks for the tip! Will try it out right away!

M.

[Downrange]

First off I apologize for not reading all 8 pages. I really like what you have done, Yak. Do I simply download the file and move it over to my user folder? Would someone mind giving me a hand in how to properly back up my current UI and install this amazing UI? thanks.

BTW, the only thing I don't like is the info that is displayed on each character ... which add-on is that so I can turn it off?

[Roodabega]

First off I apologize for not reading all 8 pages. I really like what you have done, Yak. Do I simply download the file and move it over to my user folder? Would someone mind giving me a hand in how to properly back up my current UI and install this amazing UI? thanks.

BTW, the only thing I don't like is the info that is displayed on each character ... which add-on is that so I can turn it off?

I think your talking about "Moth" - the mouse over info thingy right?

[1nkub0]

Hi guys! Love this ui but i've a problem: i can't write and read in regions channel ( /1 e /2). Other guys see what i write but i can't see.. How can i resolve this problem! thanks

[Yakar]

Do I simply download the file and move it over to my user folder? Would someone mind giving me a hand in how to properly back up my current UI and install this amazing UI? thanks.

Download YakUI.zip (see link on first page of this thread), unzip it and open the readme.pdf. There is a briefing how to backup your old ui and how to install YakUI :-)

Hi guys! Love this ui but i've a problem: i can't write and read in regions channel ( /1 e /2). Other guys see what i write but i can't see.. How can i resolve this problem! thanks

Hm, maybe a problem with ChattyCathy... you may try to delete it in your \warhammer\interface\addons and \warhammer\user\allcharacters folders and /reloadui.
If this solves the problem, at least we know what causes this issue :-(
p.s.: are the timestamps activated? if so, deactivate them for a try.

Any Chance of a 1350x768 resolution version? :D

maybe... *fg*... but it will require that me gpu does this resolution. 1440x900 is not possible with my gpu :-/ i'll give you feedback on the weekend.

the only thing I don't like is the info that is displayed on each character ... which add-on is that so I can turn it off?
ehm, what exactly? the mouse-over? the targetring? please more info on this :)

As I was looking closely at it, I recognised Squared in it, but still didn't have any clue, so thanks for the tip! Will try it out right away!

M.

as stated before - use /sqr ingame and look into the settings :-) if you can't find it, i can give you more advice on the weekend.

[Krigare]

Hi guys! Love this ui but i've a problem: i can't write and read in regions channel ( /1 e /2). Other guys see what i write but i can't see.. How can i resolve this problem! thanks

By default the "Chat" tab is set to filter out the regions channel. Right click on the "Chat" tab, go to filters, scroll down the list and find Region and Region-RvR and make sure the boxes are filled/checked. This should solve your problem.

On a sidenote, I hate not having timestamps. Is the chat slowdown an issue with an addon or with the game itself? Also that "Think before you say each word" is very annoying.

[Yakar]

On a sidenote, I hate not having timestamps. Is the chat slowdown an issue with an addon or with the game itself? Also that "Think before you say each word" is very annoying.

I'll have a look at it on the weekend and try without chattycathy etc.

[1nkub0]

By default the "Chat" tab is set to filter out the regions channel. Right click on the "Chat" tab, go to filters, scroll down the list and find Region and Region-RvR and make sure the boxes are filled/checked. This should solve your problem.


Thank you! Resolve this problem!

[Upsey]

Hey Yak...

1st off I love the interface. Thankyou for your time and effort in sharing this with the WAR community. My problem is a large drop in fps and I was wondering if anyone knows which mod might be causing the drop.

Again many thanks.

- Upsey

[Giccobie Gibmemuniez]

Does this work in umm.. 1280x720 or 1280x768? :x

[Yakar]

Hey Yak...

1st off I love the interface. Thankyou for your time and effort in sharing this with the WAR community. My problem is a large drop in fps and I was wondering if anyone knows which mod might be causing the drop.

Again many thanks.

- Upsey

you may try to deactivate/uninstall WSCT. i've heard that this addon eats a lot of gpu power.
therefor goto the \interface\addons and \user folders (and its subfolders) and delete all folders from WSCT - /reloadui
another hint is to deactivate nameplates on players heads in large number rvr situations.

Does this work in umm.. 1280x720 or 1280x768? :x

No, it....umm...doesn't. 1280x1024 is really the smallest thing i can do with my ui.
these two mntioned resolutions require a different concept of ui and layout design. i would advice you to have a look at this great ui from fraith (http://www.warhammeralliance.com/forums/showthread.php?t=236329)

[Downrange]

Yak, first off, thank you so much for this fantastic UI you have so graciously put together. It has streamlined my UI and it seems may have even given me a bit of an FPS boost.

My one issue is I cannot seem to adjust my Brightness and Gamma in-game. Is this an issue with the UI and how can I fix this since my game is very dark right now?

Also, what is the difference between windowed and full screen mode and is there a benefit to using one or the other? I have always used full screen, but I seem to be finding people who use window mode and I was wondering why that is.

Thanks again for an awesome UI, Yak!

[Yakar]

Yak, first off, thank you so much for this fantastic UI you have so graciously put together. It has streamlined my UI and it seems may have even given me a bit of an FPS boost.

My one issue is I cannot seem to adjust my Brightness and Gamma in-game. Is this an issue with the UI and how can I fix this since my game is very dark right now?

Also, what is the difference between windowed and full screen mode and is there a benefit to using one or the other? I have always used full screen, but I seem to be finding people who use window mode and I was wondering why that is.

Thanks again for an awesome UI, Yak!

I use windowed mode because i can swap faster to other windows and overlay the warhammer window (for example with xml files i just edit for the ui, or with the firefox window while i wait for a scenario to pop). but if you play in that windowed mode, you cannot alter the gamma settings. so in your case just switch back to fullscreenmode (make sure the resolution is the same! there are 2 different settings here) and edit the gamma correction :-)

[w0rm]

I downloaded YakUI. I have a widescreen monitor and I use 1280x768 resolution. The UI didn't work for me and I found out (by reading this thread ofc) that the author is not going to make one. Well I have been customizing my own UI before so I decided to give it a shot and modify it for 1280x768 resolution. Currently it looks good, I just have to test it out in some scenarios

http://img3.imageshack.us/img3/5203/adri060cp5.jpg (http://img3.imageshack.us/my.php?image=adri060cp5.jpg)

Looks like I just need to fiddle with Squared to make it smaller and I could upload the widescreen version somewhere if author of this addond doesn't mind.

EDIT: looks like I sorted Squared out. I am gonna play this evening, look how it goes for proper testing :)
http://img24.imageshack.us/my.php?image=adri061tx1.jpg

[Narcix]

I love the look of this UI. I was able to get things where I wanted them and work around some of the limitations the default layout editor presents and my own lack of experience. Until installing this package I was using a lot of curse Add-Ons alone.

Since installing the UI I am having the following issues:

1) Target Ring no longer works, its enabled in the mod section. I dont know how to fix this.

2) Regardless of how I resize my chat window I am still having issues with lines of text not appearing until someone else chats. I have the time stamp enabled. I am wondering how to shut that off and IF it would even matter if I did (I assume that might be the culprit I did not have it on before installation of this UI). I also use Myriad Large Font because I run a high resolution and would like to keep that font size.

3) I cannot seem to figure out how to get my objective tracker working again. Realm status and etc are working fine but this is not.

4) My loot window is completely gone. I have no option to need, greed, or pass on loot when something drops and is looted. There is obviously something doing this for me, I dont know what it is, and would like to shut it off if possible.

5) I cannot seem to resize the left and right boxes that seem to be default in placement. I would like to put my chat box and misc other things INSIDE these boxes but they are to small at my resolution. No idea if its possible to resize these but if so that would be great.

Really appreciate any help! And, thanks again for the UI!!

[w0rm]

1) Target Ring no longer works, its enabled in the mod section. I dont know how to fix this.

Did you remove your previous interface and user folders prior to installing this UI?
Also, I suggest you to make a backup before removing.
I installied it today and did not have any issues with it.


5) I cannot seem to resize the left and right boxes that seem to be default in placement. I would like to put my chat box and misc other things INSIDE these boxes but they are to small at my resolution. No idea if its possible to resize these but if so that would be great.

Use /xpanels to modify the panels.

[Narcix]

Yes, I deleted, copied, and saved those folders elsewhere before installing the new.

[computerpunk]

Try /tr on for TargetRing.

[AmigoJuan]

is there is reason why i dont get the loot window? when loot drops? people in my wb getting loot but i dont get the window to chose greed/need?

[w0rm]

is there is reason why i dont get the loot window? when loot drops? people in my wb getting loot but i dont get the window to chose greed/need?

Try altering cabal Need options through /cn

[Skrew]

Ui Looks great , Just wish someone would upload a 1440 x 900 version :D

[AmigoJuan]

got another question? i play a sorc is there anyway to bring up my DarkMagic icon that tell's me how much DM i have?

[Yakar]

icon?

you do have a little bar below your hp bar and below the ap bar. that bar is called career bar and displays career specific values like combo point, dark magic, etc.

[Dargathi]

Outstanding UI, just what I needed.

I have made a large number of changes though, some of the Mods you have I dont need or want, but there are some I need/want you dont have.

with that in mind, would it be possible for you to create a changed files list? So for future versions we can just update the files that have changed ;o)

also..

will you be testing this on the test server for the new 1.2 patch? there are a few changes ot the UI that may impact.

many thanks again

[Yakar]

Outstanding UI, just what I needed.

I have made a large number of changes though, some of the Mods you have I dont need or want, but there are some I need/want you dont have.

with that in mind, would it be possible for you to create a changed files list? So for future versions we can just update the files that have changed ;o)

hm, good point. i'll track changes from v1.02 on :>

also..

will you be testing this on the test server for the new 1.2 patch? there are a few changes ot the UI that may impact.

many thanks again

yeah i'll try and do a yakui on the testserver. at least there will be a basic ui - but i can't promise everything will be the same 1 day after patch 1.2 of course :>

[Genesis75]

hm, good point. i'll track changes from v1.02 on :>



yeah i'll try and do a yakui on the testserver. at least there will be a basic ui - but i can't promise everything will be the same 1 day after patch 1.2 of course :>


I just downloaded your UI. I am not usually a fan of compilations, but the personal touch you put to this compilation is great. Thanks for stay up to date on the addon. Much appreciated.

Thanks for the different resolution settings. THat was keeping me from trying this compliation before.

[Narcix]

I've resolved all of my previous issues with one exception. I cannot seem to get my Battlefield Objective Tracker to work. Any help correcting that would be greatly appreciated. Its an invaluable tool when organizing, coordinating, alliance/multi-alliance warbands.

[AmigoJuan]

is there is reason why i dont get the loot window? when loot drops? people in my wb getting loot but i dont get the window to chose greed/need?


ok i deleted that need/greed addon and i still dont get the loot window? is there something i have to enable?

[AmigoJuan]

ok i deleted that need/greed addon and i still dont get the loot window? is there something i have to enable?


anyone know how to fix this? still get no loot :(

[Yakar]

I've resolved all of my previous issues with one exception. I cannot seem to get my Battlefield Objective Tracker to work. Any help correcting that would be greatly appreciated. Its an invaluable tool when organizing, coordinating, alliance/multi-alliance warbands.

you're talking about the objective tracker from State Of Realm (which is included in yakui 1.02), or of some other trackers? is state of realm active (type /addon and have a look in the list)? maybe you have a look at the stateofrealm settings (rightclick on the red button near the chatboxes).

ok i deleted that need/greed addon and i still dont get the loot window? is there something i have to enable?

same here :) are you sure, that cabal need/greed is not active? please check with /addon and have a look in the list.



p.s.: please tell me your ui version (as some people still use 1.01) and your resolution if the topic may have something to do with the layout (also not visible objects, etc.)

[Wok]

First off, cheers for putting together this UI. I had to tweak it a bit (remove the loot addon, add some mods I consider crucial like BuffHead, etc) but I was having some problems lately with the top action bar randomly disappearing from sight (even though it's still there and still functions - not a huge deal since I keybind everything but aesthetically it's disappointing)

How is usually is: http://img530.imageshack.us/img530/9895/set1od9.jpg

Top bar disappearing: http://img22.imageshack.us/img22/7241/set2ba1.jpg

got another question? i play a sorc is there anyway to bring up my DarkMagic icon that tell's me how much DM i have?

I found a good spot to put it was to the upper right of the chatbox. There's a little indentation that's just the right size for it: http://img293.imageshack.us/img293/3395/combustwk0.jpg

[Yakar]

AshaneFB (http://www.warhammeralliance.com/forums/member.php?u=108456) also mentioned that problem with the 3rd bar. any news to this issue ashane?
tbh, i don't have a clue what triggers this yet (actually i never had that kind of behavior).
there is also nothing that special with the bars. i use a 4 bars layout, edit the number of buttons with vertigo and resized&positioned the bars with the ea layout editor. ok, and nambla for the look. maybe we can limit the possible reasons with some questions... are only specific classes affected (maybe classes with stance bars)? can we be sure that this is not triggered by a keybinding for barswapping which is accidentially hit? does it only happen in combat situation or also when idling?

[AshaneFB]

About the action bar disappearing...

I still honestly cannot find a "fix" that I know will work 100% of the time.

I've isolated it to Vertigo however.

The trigger appears to be moving a ability into or out of the third action bar, this seems to trigger it damn near always. The result is usually when dying, zoning, or not clicking on the bar in a 5 minute time frame.

Anyway, my "fix" (again, I'm not positive this will work 100% of the time, as I didnt code Vertigo and I dont even know enough to try LOL)...

Whatever bar is disappearing, show/rehide the empty boxes.

Usage:

/vert empty (bar #) show
/vert empty (bar #) hide

An that should fix it, until such a time as you move around abilities in that third box again. For some odd reason its only been the third box in all my tests.

Anyway, that's worked for 4-5 people, so it is hardly a accurate fix, but give it a shot and keep us updated if it works.

[Avantasia]

Yeah, my second and third bar abilities are disappearing whenever I zone, die etc ...

I just drag an ability from my first bar out and all my abilities will come up again. No idea what caused it, but it just started happening all of a sudden. I can still use the hotkeys to activate the abilities even when they're not showing.

[AshaneFB]

Yeah, my second and third bar abilities are disappearing whenever I zone, die etc ...

I just drag an ability from my first bar out and all my abilities will come up again. No idea what caused it, but it just started happening all of a sudden. I can still use the hotkeys to activate the abilities even when they're not showing.

Avantasia,

Please try the above fix and let us know if it works for you as well?

If enough of us isolate the fix, then we can present the exact issue to Aiiane and maybe get it fixed, otherwise would be too hard to go through every portion of Veritgo without knowing exactly where the issue is.

[Aiiane]

If enough of us isolate the fix, then we can present the exact issue to Aiiane and maybe get it fixed, otherwise would be too hard to go through every portion of Veritgo without knowing exactly where the issue is.

Please note that Vertigo is merely a tool used to adjust settings of the default UI's action bars module. Vertigo's code isn't what actually makes things appear, just like your remote control isn't what actually displays a TV show. Thus, if something doesn't work as expected, there's nothing to change in Vertigo to fix that - if your TV breaks, you can't fix it by changing the remote control.

Personally, I'd suggest not using the 'empty' command - the actionbars module doesn't support it very well.

[AshaneFB]

Please note that Vertigo is merely a tool used to adjust settings of the default UI's action bars module. Vertigo's code isn't what actually makes things appear, just like your remote control isn't what actually displays a TV show. Thus, if something doesn't work as expected, there's nothing to change in Vertigo to fix that - if your TV breaks, you can't fix it by changing the remote control.

Personally, I'd suggest not using the 'empty' command - the actionbars module doesn't support it very well.

Hmm...

It is the empty command that is doing it, I've got that far and know that much. (Also browsing around veritgo on the curse page shows 10+ users with the same issue, using empty as well)

So I guess we are just stuck either not using empty or making a macro to do those two commands and "reset" the UI/Veritgo so it shows the buttons correctly.

[Bannoc]

Hmm...

It is the empty command that is doing it, I've got that far and know that much. (Also browsing around veritgo on the curse page shows 10+ users with the same issue, using empty as well)

So I guess we are just stuck either not using empty or making a macro to do those two commands and "reset" the UI/Veritgo so it shows the buttons correctly.

I'm curious, why use the empty option instead of setting that hotbar to have the required number of buttons?

[AshaneFB]

I'm curious, why use the empty option instead of setting that hotbar to have the required number of buttons?

Honestly dont know, I didnt set up YakUI I'm just a client! :P

However, woudnt just setting up that required number of buttons mess it up?

Example:

Action Bar 3 has abilities on 1-2-3 6-7-8-10. Vertigo has no way to just those 7 abilities if I'm not mistaken, does it? Havent honestly checked.

[AmigoJuan]

you're talking about the objective tracker from State Of Realm (which is included in yakui 1.02), or of some other trackers? is state of realm active (type /addon and have a look in the list)? maybe you have a look at the stateofrealm settings (rightclick on the red button near the chatboxes).



same here :) are you sure, that cabal need/greed is not active? please check with /addon and have a look in the list.



p.s.: please tell me your ui version (as some people still use 1.01) and your resolution if the topic may have something to do with the layout (also not visible objects, etc.)


version 1.02
1280x1024 resolution

[computerpunk]

Honestly dont know, I didnt set up YakUI I'm just a client! :P

However, woudnt just setting up that required number of buttons mess it up?

Example:

Action Bar 3 has abilities on 1-2-3 6-7-8-10. Vertigo has no way to just those 7 abilities if I'm not mistaken, does it? Havent honestly checked.

You can set the number of buttons then rebind the keys. Pie.

[AshaneFB]

You can set the number of buttons then rebind the keys. Pie.

Perhaps if you wanted them all clustered together, but that wasnt really the intention in the example.

It is far easier to group by cluster specific ability types for those that dont use a N52.

[Lilith911]

Great UI, really in love with this compilation. One question tho, Is there any way to display hostile target buffs? If not, mind suggesting some addon for them ?:)

[Yakar]

Great UI, really in love with this compilation. One question tho, Is there any way to display hostile target buffs? If not, mind suggesting some addon for them ?:)

as far as i know the holy API doesn't give us the information which buffs a hostile target has. Only debuffs are shown and this is handled with daoc-buffs (http://www.warhammeralliance.com/forums/showthread.php?t=208598) in my ui. you may try to configure it more to your demands with /daocbuff ingame (please see link above for more details on daocbuffs).

[Lilith911]

Mhm, I thought that the default UI has hostile buffs display, as far as hots go atleast.
I was cutting some addons I found unnecessary as I dont play healer so maybe I have deleted something I shouldnt have. Will check out those daocbuffs options.

Edit: Got it to work, had to turn on all effects in hostile debuff section. Sadly there are no limitations to buff duration so it gets quite messy :/

[Martell]

I re-enabled the Main Assist button via /phantom. The problem I am having is that every time I log in, the danged skull has moved back to the upper left corner of my screen. It just won't save in the position I want it in. I can move it wherever I want for a game session, but as soon as I quit and start the game again - bam! back in that danged corner.


Can anyone tell me why it won't save where I want it placed?

[Aiiane]

I re-enabled the Main Assist button via /phantom. The problem I am having is that every time I log in, the danged skull has moved back to the upper left corner of my screen. It just won't save in the position I want it in. I can move it wherever I want for a game session, but as soon as I quit and start the game again - bam! back in that danged corner.


Can anyone tell me why it won't save where I want it placed?
http://war.curse.com/downloads/war-addons/details/haa.aspx

[Ozric]

Can I configure Waaaghbar to look like that (not cover the entire width of the screen)?
Haven't been able to find it on my own.

[Yakar]

Well, actually Waaaghbar does cover the entire screen. the trick is to raise the layer of everything, that should be in front of it :grin:
xpanels are background layer, waaaghbar is default layer, everything that should be in front of waaaghbar is secondary (or higher) layer.
And just to clarify: waaaghbar elements are set to bind right and waaaghbar transparence is set to 0. the look of the "bar" is the panel below it.

[Coreolis]

Awesome UI

Quick question though. I changed the waaaghbar settings so it would fit better into its xPanel. Problem is that when I disabled some of the displays, waaaghbar went back to the top of the screen. How do I move the bar back to the bottom of the screen? Do I have to reinstall your UI? Is the answer right in front of me? XD

Thanks in advance.

[Yakar]

Awesome UI

Quick question though. I changed the waaaghbar settings so it would fit better into its xPanel. Problem is that when I disabled some of the displays, waaaghbar went back to the top of the screen. How do I move the bar back to the bottom of the screen? Do I have to reinstall your UI? Is the answer right in front of me? XD

Thanks in advance.

that happens sometimes when you change something in waaaghbar. just go into the waaaghbar settings with /wgb
-> set bars and assign all plugins to bar 2 (lower bar). if nesseccary goto set alligment if plugins are not bound to the left :)

[TXMarine]

Really clean UI. I really wanted to use it but editing it to my resolution of 1920x1080 was just too much for me to do. Think I was on the right track but it ended up just looking too odd and my hacking of it caused it to lose a lot of what you were doing with it.

Best of luck with it.

[wetwilly92]

any news on a 1350x768 ui?

[Dargathi]

hm, good point. i'll track changes from v1.02 on :>



yeah i'll try and do a yakui on the testserver. at least there will be a basic ui - but i can't promise everything will be the same 1 day after patch 1.2 of course :>

Brilliant,

you of corse are a super duper star ;o)

[Lilith911]

I would have one more question if you dont mind. I find Waaghbar to be quite annoyance so I have removed it and copied back the original EA_RPbar folder so I can see the default renown bar again. But for some reason Im unable to move it with the UI manager, am I missing something ?:)

[Yakar]

any news on a 1350x768 ui?

hm, i haven't checked yet if i can run that resolution on my mashine. i'll do so and if possible do a 1350x768 version on the weekend.

I would have one more question if you dont mind. I find Waaghbar to be quite annoyance so I have removed it and copied back the original EA_RPbar folder so I can see the default renown bar again. But for some reason Im unable to move it with the UI manager, am I missing something ?:)

you will have to re-register it to the layout editor with lemmie :)
type /lemmie to chat and you'll get a list of ui stuff. look for the xp_bar and rightclick it. now it is registered and will appear in the ea-layout-editor and you can resize and move it. :)

[Lilith911]

Aww, got it working now, Thanks ! ;)

[Chedaa]

Hi, thanks for this UI :)

( a little question : why do you use a border texture and a background one for one panel in xpanels ? )
(sorry for my english)

[Yakar]

Hi, thanks for this UI :)

( a little question : why do you use a border texture and a background one for one panel in xpanels ? )
(sorry for my english)

the two textures have different alpha values ;)

[Wok]

I would like to ask which mod it is in this compilation that makes dying outfits with inventory dye impossible directly on the character sheet and also prevents you dragging items from your character sheet to hotbar, as it's quite irritating :(.

[Yakar]

I would like to ask which mod it is in this compilation that makes dying outfits with inventory dye impossible directly on the character sheet and also prevents you dragging items from your character sheet to hotbar, as it's quite irritating :(.

itemrack changes the way to handle those things. i'll write you some info on usage later ;)

[AmigoJuan]

anyone having the problem where the middle action bar disapears on the 1280x1024 version?

[Yakar]

anyone having the problem where the middle action bar disapears on the 1280x1024 version?

sorry folks, i've been looking for information on this for a while, but i was not able to recreate this behavior on my mashine at all and haven't found anything to this topic.
can someone with this issue try and activate the "action bar lock icon" with phantom (type /phantom for the menu, check the action bar lock icon, close the menu), lock the bars and then see if it still happens? or check the ea-layout editor when the bar has disappeared -> is it bar still visible and set to "show"?

[Aendeth]

whats a great ui, installed it with no problems just wanted to thank you for all the time and effort you spent in making them, will defo keep a look out for more of your work

[Yakar]

whats a great ui, installed it with no problems just wanted to thank you for all the time and effort you spent in making them, will defo keep a look out for more of your work

sometimes good to hear that it works for at least some ppl without problems ;)

[Arth]

Just downloaded this UI and must say it amazing.

I do have one problem,sorry if its a nub question but,I seem to have the red alert around the borders of my screen(like when you get hit) it flashes red,but on my screen its permanent,Do you know of a way to take this off.

Thanks in advance

[Yakar]

this happens when one of the larger basic frames like map, tome of knowledge, etc. is open. when it happens while none of those frames is visible, i would suggest to open every frame ones (m, f7-f12 in yakui) and close them again.

[Aiiane]

/script WindowSetShowing("ScreenFlashWindow", false)

[Chaosforce]

just got this mod, i do love it, just 2 questions.

1- For w/e reason my quests dont actually show up, its just little button, how do i get it to display the actual text

2- My 2nd thing is what is the mod that actualy shows me and my health and such so i can edit it.

[Yakar]

just got this mod, i do love it, just 2 questions.

1- For w/e reason my quests dont actually show up, its just little button, how do i get it to display the actual text

2- My 2nd thing is what is the mod that actualy shows me and my health and such so i can edit it.

1 - use the questtracker-button at the minimap twince and quests will be shown correctly. this happens when you use kwestor the first time.
2 - use /huduf the open the config.

[Kynicus]

Hello. Great job with the UI. Looks great and there is some very handy stuff included. I am just not happy with the damage numbers flowing and crits showing up on my character. Id rather see the damage numbers appear above my target. Also I would like to include the global cooldown again so i notice if a spell actually went off. Can someone tell me what to do with the damage numbers? which mod i should delete and how. thank you for you replies.

[Yakar]

Global Cooldown -> GlobalCooldownRemover
Damagenumbers -> wsct

to delete them go to your warhammer install directory -> \interface\addons and delete those folders. then go to warhammer install directory -> \user\interface\AllCharacters and there delete those 2 folders too.

[Kynicus]

thanks m8. just found the option for deactivating em just didnt know which mod was the dmg number one. the name really doesnt tell you :D

[Kynicus]

Good job btw. really a good addon. One thing you should change it the healthbar. Chane the color. Make it Green on Red because with the Grey on Black you have allmost no contrast. Just a thought. Is it possible to manually chnage that?

[Arth]

Thanks for your help,Ill try it tonight!

[Yakar]

Good job btw. really a good addon. One thing you should change it the healthbar. Chane the color. Make it Green on Red because with the Grey on Black you have allmost no contrast. Just a thought. Is it possible to manually chnage that?


you can change it with /huduf and edit the settings of the unitframes. but keep in mind, that yakui is set to overlay the basic color (light grey) equal to the level of your hp.
if you have full hp, the color is pretty dark grey due to the overlay. when your hp decreases, the color of the bar gets lighter until it reaches the basic light grey.
high hp = dark bar, low hp = bright bar
so if you want a static color, first disable the overlay and then change the color as you want.

[Downrange]

Just a couple of things....

When dyeing items, I have to unequip the item, dye it while it's in my backpack and then equip the item -- due to this, I cannot preview the color that my item will be. Is there a fix for this?

Also, one of the action bars (the one at the very top) disappears and I need to move an ability in order to get the top bar to appear. Is this normal?

Other than that, I love this UI....just love it!

[Saufen]

Thanks for the ui. Its clean and what i have been looking for.

[DeadBen]

can anyone tell me what this artifact/mis-positioned hud is? I cannot move, hide, or make it transparent in the UI editor.

Upper left part of the screen.

http://i7.photobucket.com/albums/y277/DeadBen/Woodward_008.jpg

This UI is absolutely fantastic.

[Yakar]

Just a couple of things....

When dyeing items, I have to unequip the item, dye it while it's in my backpack and then equip the item -- due to this, I cannot preview the color that my item will be. Is there a fix for this?

are you sure, you are using the slide "character" and not the slide "itemrack" (which looks quite similar)? just tried to color an item i wear and this worked normal.
this cursed bar issue... i tried to create the same behavior for more than 2 hour with no success. and i also looked into forums on info on this. no success :-(
as stated before: please try and open phantom, check the "action bar lock icon" and leave phantom. now lock the bars and see if it happens again. also i would like to know, if the actionbar is still visible in ea-layout editor when it disappeared on screen. you can also try /vertigo empty 3 show (please verify in the ea layout editor the bar number - should be bar 3)
it is pretty hard to fix something, that you can't reenact. :-(

[Yakar]

can anyone tell me what this artifact/mis-positioned hud is? I cannot move, hide, or make it transparent in the UI editor.

Upper left part of the screen.

http://i7.photobucket.com/albums/y277/DeadBen/Woodward_008.jpg

This UI is absolutely fantastic.

this could be your defensive target, or your own unitframe, or a groupframe. are you using any other unitframe mod than huduf (which comes along with yakui)? as far as i can say, this is not a yakui setting :P

[DeadBen]

well I deleted my user and interface folders before installing YakUI so I'm not sure where it is coming from. The same thing happened when using another UI early on. I'd have those buffs stuck in a weird place. I'll cross reference some stuff.

[Yakar]

did you update phantom (maybe automatically with curse client)?
if so, look into the /phantom options and uncheck warband group, etc.

[Jerichox]

what version should I use for 1280x800?

[Dhalin]

Hello Yak,

first of all: Great UI and thanks for the work you invested!
I have one question currently: Is there an option to make the icons in your ability bars "stick/unmovable", so that they do not glue to your cursor whenever you click on them for a longer time?

Dhalin

[Yakar]

Hello Yak,

first of all: Great UI and thanks for the work you invested!
I have one question currently: Is there an option to make the icons in your ability bars "stick/unmovable", so that they do not glue to your cursor whenever you click on them for a longer time?

Dhalin

yes it is, open /phantom and check "action bar lock icon". then lock the bars with this icon at the action bars and re-hide the button with phantom.

[Dhalin]

Thanks Yak!
Btw is there a chance for a 1440x900 version of your ui?

Dhalin

[Yakar]

Thanks Yak!
Btw is there a chance for a 1440x900 version of your ui?

Dhalin

no, sorry :( my gpu can't run that resolution and therefor i can't make this :(

[Jerichox]

what version should I use for 1280x800?

Yakar :confused:

[Yakar]

Yakar :confused:

i can't hardly supply every possible resotion. there is a 1280x1024 resolution in the pack though.
it IS a lot more work to maintain every single resolution and therefor i'm gonna do a 1360x768 version and that 4 (including 1920x1200, 1680x1050 and 1280x1024) will be the only versions i'll supply.

[Jerichox]

uhm I think u misunderstood the question.I was just asking which one would be better for 1280x800
to minimize loss of graphix/analysis or whatever it's called.

[Downrange]

are you sure, you are using the slide "character" and not the slide "itemrack" (which looks quite similar)?


I'm not quite sure what you mean by this. Here's what I do...

I open the character window and my backpack.
I click on the dye in my backpack.
I move the "ink" icon over to the item I want to dye -- the item that is ON my character, (not the items that "slide" out from the side which are still in my backpack).
I click on the item, and I get nothing.

Also, locking the actionbar through phantom seems to have worked.

[Yakar]

you do have different slides within the character window (http://img529.imageshack.us/img529/3333/admira000.jpg). one slide is called "character", another "item rack", etc.
the itemrack slide cannot be used to dye items :)

[Jerichox]

just a little correction. for cabal need the command is /cn (not /vn) :)

[Yakar]

just a little correction. for cabal need the command is /cn (not /vn) :)

ups, my bad :)

i don't use it anymore. with yakui 1.03 tinyroll will replace it :)

[wetwilly92]

i can't hardly supply every possible resotion. there is a 1280x1024 resolution in the pack though.
it IS a lot more work to maintain every single resolution and therefor i'm gonna do a 1360x768 version and that 4 (including 1920x1200, 1680x1050 and 1280x1024) will be the only versions i'll supply.

:grin:

any idea on a release date for 1.03?

[Yakar]

:grin:

any idea on a release date for 1.03?

well, i keep track on the changes on state of realm v3. imho the function the broadband and receive bfo-timers from other player is a very good feature and i certainly want this in v1.03. but there are still some issues ratsug is working on.
if sor3 is working properly, yakui 1.03 will be out ;)
here is an impression (http://foto.arcor-online.net/palb/alben/18/3693518/1920_3435356163346630.jpg) of the visual changes. notice the changes to the lower segments. i decided to drop waaaghbar. action bars, the chatframe and squared are flashy enough and i wanted the other element less eyecatching.
this is not final of course; still some things to do :)

[Filthydan]

Well I downloaded this UI last night and played around with it this morning.

Absolutely fantastic matey - most impressed.

Anyway I was reading with interest about actionbar 3 going blank and didnt have any problems with it all day. Then when I used my WH late on it happened. I only had 2 actions bound to it so I opened my abilities panel to drag em on quickly - and as I clicked on an ability to drag it - bar 3 became visible again.

I didnt have to drag it - just right clicked on any icon as if i was about to drag it and voila - it reappeared.

Dunno if that helps the long running problem solving.

So just a thank you from me.

Co-incidentally I had a running battle with a Sorceror called Yakui on EU K8P in a couple of scenarios and thought how strange would it be if you were one and the same - and yep i did get owned a lot - i reckon there must be some hidden code in the UI that prevented me killing you/him! Either that or it was the uber protection they were getting from their teammates? (and I may suck a little at WH)

Made me smile anyway.

Keep up the good work :) - a satisfied user.

Meng Glodsson (Engie)
aka Genscher (WH)

[Yakar]

with a Sorceror called Yakui on EU K8P

i don't play on k8p, my chars are all on erengrad-eu
admyra and admira atm ;-)

who names his toon yakui :confused:

[computerpunk]

Lol Genscher, nice to see you here. I'm Therzok the Bright Wizard and I'm competing with an UI. :3 I smiled, lol.

[Gil Estel]

Great UI... i love IT... really a good job...

only 2 questions:

- i''m usin the 1240x1024 resolusion and i'd like to have the class icon near squared bars but ii can't find the squared comand...

- phantom u use is the old one... if i update it it didn't work so fine... how can i manage this problem?

can u help me?

thank u very much for your work

[Yakar]

both phantom and squared will be updated with v1.03
the new version will also include the settings to show the character-icons in squared.
here (http://foto.arcor-online.net/palb/alben/18/3693518/1920_3462323534643733.jpg) is a screenshot to illustrate this.

edit: added current phantom & squared settings to screenshot

[Bant Warick]

Loving the UI Yakar. A jolly well done from me. Double points aswell due to the fact that I haven't experienced any of the problems that other people seem to be having.

One question though. I'm more of a mouse user when selecting abilitys, so it can get annoying when selectig an ability and actually dragging it off the actoin bar instead. So is there any way to lock the action bar now?

[Gil Estel]

both phantom and squared will be updated with v1.03
the new version will also include the settings to show the character-icons in squared.
here (http://foto.arcor-online.net/palb/alben/18/3693518/1920_3462323534643733.jpg) is a screenshot to illustrate this.

edit: added current phantom & squared settings to screenshot

thank u very much...

[Yakar]

Loving the UI Yakar. A jolly well done from me. Double points aswell due to the fact that I haven't experienced any of the problems that other people seem to be having.

One question though. I'm more of a mouse user when selecting abilitys, so it can get annoying when selectig an ability and actually dragging it off the actoin bar instead. So is there any way to lock the action bar now?

hi bant :)
yes there is a way to lock the bars. first open the phantom configuration with /phantom. there you will find a checkbox for "action bar lock icon". check it :)
then exit phantom config and you will see a lockicon right at the action bars. click on it and an checkmark will appear. now you can hide this lock again with phantom.

cheers
yak

[Snoepie]

this Ui looks much better than all the other ones..

Going to try this at home tonight to set things up..

Hopefully its going to work if not i will be posting here also..

thx

[r33f]

My mouse-over target window only shows classes now. Any ideas?

[Aiiane]

hi bant :)
yes there is a way to lock the bars. first open the phantom configuration with /phantom. there you will find a checkbox for "action bar lock icon". check it :)
then exit phantom config and you will see a lockicon right at the action bars. click on it and an checkmark will appear. now you can hide this lock again with phantom.

cheers
yak

You can also just open the Customize UI menu (press U), then expand the Action Bars section and check or uncheck the box to lock the bars there.

[Cubbie]

My mouse-over target window only shows classes now. Any ideas?


I'm having the same issue.

[Demarca]

Likewise, same issues with target windows

[Demarca]

Likewise, same issues with target windows

It's Moth thats broken. Theres an update now for it.

Other issues with today's game update:
-Party/Warband Window is showing... can't disable it. (I don't know what the /disable EA******** command is)

[Alfonse]

I dont know if anyone else has done it, but I saw a post asking for a 1080 UI and I uploaded my reconfig of YakUI for them in another post. Here's the link to the screenshot and rar file. Feel free to add a link in the first post if you want... feel free to host it wherever you want as well.

Screenshot (http://www.completeownage.net/ui.jpg)

Download (Rar format) (http://www.completeownage.net/yakui.rar)

[Yakar]

I dont know if anyone else has done it, but I saw a post asking for a 1080 UI and I uploaded my reconfig of YakUI for them in another post. Here's the link to the screenshot and rar file. Feel free to add a link in the first post if you want... feel free to host it wherever you want as well.

Screenshot (http://www.completeownage.net/ui.jpg)

Download (Rar format) (http://www.completeownage.net/yakui.rar)

good job :)
may i add this to the first page?

[Alfonse]

Absolutely... I did forget to mention I replaced Huduf with Pure in my UI. Don't know if that's gonna bother anyone or not, but it's worth mentioning either way.

[Rhykris]

I downloaded your UI today and i start to have some problems with it :/ i dont know if anything of it was already discussed here but i hope for quick help, cause i like it alot :D

First of all: Why is my Chatwindow always deleting the lock of my session when i port, so that i cant read anything more except what is in the window right now
The second Problem has to do with Moth: My Mouseover just Shows the Carrer Icon of the Class im targeting nothing more :/ i looked into the Moth.settings but i dont have a clue what i can change theire :)

last but not least (omg school englisch sucks oO) how exactly do i configure itemrack? i did create 2 templates with tactics and weapons (playing a sigmar atm) but when i click on the button to change my equip it just changes my tactics

i hope my english is good enough to understand ;) otherwise i apologise :D

greetings

[Caldrik]

rhykris i your moth problem is simple ... just download the new version of it and then it works, got the same problem today because of the patch and now it works again ...

so far
Caldrik

[Wok]

Anyone get this UI working with planb for Swordmasters/Black Orcs? It's action bar hell for me at the moment trying to get action bar 4 to show more buttons ("vertigo cols 4 10" doesn't work) and hiding action bars 2 and 3. Looks messy as hell.

[Rhykris]

thanks it works well now :)

i tested around a bit to figure out whats responsible for my chat problem and it doesnt seem to be ChattyCathy :/ It sucks that every 10minutes or something like that, my chat cleanes up and just shows the entrys from last few minutes

[Yakar]

thanks it works well now :)

i tested around a bit to figure out whats responsible for my chat problem and it doesnt seem to be ChattyCathy :/ It sucks that every 10minutes or something like that, my chat cleanes up and just shows the entrys from last few minutes

is your chatbuffer set to "unlimited"? look in the settings for this option :)
itemrack doesn't work properly on my mashine as well. i'm looking for a fix, or will delete it in the upcoming version 1.03.

[AshaneFB]

Anyone get this UI working with planb for Swordmasters/Black Orcs? It's action bar hell for me at the moment trying to get action bar 4 to show more buttons ("vertigo cols 4 10" doesn't work) and hiding action bars 2 and 3. Looks messy as hell.

Yes.

Basically you simply edit plan B and change it from bars 1,2,3 to bars 1,7,8. (Or whatever bars you want)

Bars 1,2,3,4 are being used by YakUI, so you want to avoid those.

To do so, go into your WAR folder, user directory and find PlanB. Edit the SavedVariables file. Place this in there... it will use bars 1, 7, and 8. (Edit it if you want other bars, but you'll at least see the makeup of it) I'm pretty sure theres a slash command to do the same thing, but I dont know it off hand, was added well after I had been using PlanB so didnt bother :)

PlanB.data =
{
silent = false,
active = true,
hotbar = 1,
page =
{
7,
8,
[0] = 1,
},
pagemax = 5,
}

[Eendje]

Anyone get this UI working with planb for Swordmasters/Black Orcs? It's action bar hell for me at the moment trying to get action bar 4 to show more buttons ("vertigo cols 4 10" doesn't work) and hiding action bars 2 and 3. Looks messy as hell.
i changed the top and middle bar to bar 3 and 4. for planb you can use the command /planb page=1,2,5 and it will cycle through 1, 2 and 5.

is there already an update for huduf for 1.2 btw? i cant seem to get my hp bars working at the PTS :(

nvm, updated huduf and working like a charm now :)

[Yakar]

hi folks,

just to give you some feedback on the progress on 1.03... i just gave an alpha version from 1920x1200 resolution to alfonse to test and create a 1920x1080 version to be included in the final files. if this works well, i'll do the other resolutions based on this files. so please be patient, release will most likely take till weekend.

cheers
yak

[Alyster]

I just started having issues with action bars dissapearing. Bar 3 and 4 seem to dissapear when I zone, and will reappear if I select a skill or item as if I were about to hotbar it.

[Aendeth]

Hey yak

I was wondering do you manage to pull other ui together for maybe other games, i asking this cause i dont remember seeing your name around but if you did i would love to have a link for the other since these are such clean easy going ui. i might be wrong but im sure my fps is better also.

I posted your ui picture on my forums for others to see, and everyone from mystical awakening loves it i sure theres a good 10+ people using it there now.

[Yakar]

I just started having issues with action bars dissapearing. Bar 3 and 4 seem to dissapear when I zone, and will reappear if I select a skill or item as if I were about to hotbar it.


i completly rebuild the bars for 1.03. that means i deleted all of the ui files including the ea-elements and forced the game to reinstall them. then i added the addons back to the game and reworked the bars based on the freshly installed ea-bars. hopefully this will fix the problem; i think the problems may occur since yakui 1.02 still used the ea-elements from lower patchlevels.
BUT this means a lot more work to build 1.03 for the different resolutions.. and that is the reason for the delay of the release till weekend ;)

Hey yak

I was wondering do you manage to pull other ui together for maybe other games, i asking this cause i dont remember seeing your name around but if you did i would love to have a link for the other since these are such clean easy going ui. i might be wrong but im sure my fps is better also.

I posted your ui picture on my forums for others to see, and everyone from mystical awakening loves it i sure theres a good 10+ people using it there now.

hey aendeth :)

good to hear that people like this ui :P i used to play wow with my own ui, but as i played in 1024x768 and later 1280x1024, it was not that clean and since i played with caithlyn on horde/gorgonnash there was already someone who did a great ui - no reason for releasing my own ;) here is a screenshot (http://foto.arcor-online.net/palb/alben/18/3693518/1024_3731353830653263.jpg) from wow just before bc (winter 2006 i guess).
well, i started the ui thing with warhammer and my current 24'' tft :P

cheers
yak

[Rhykris]

is your chatbuffer set to "unlimited"? look in the settings for this option
itemrack doesn't work properly on my mashine as well. i'm looking for a fix, or will delete it in the upcoming version 1.03.

it is the chatbuffer, but everytime i start the game the settings are resettet :/ so i have to change it every time :)

[Aendeth]

never mind then i always used tapestry ui but i found this was to be memory intensive, i guess i will just keep a look out for others unless i get a heads up on another good ui thats effective and clean like yaks ui,

any good features coming up in this new ui btw,

[Yakar]

any good features coming up in this new ui btw,

- revamp of the lower sections (below the action bars and squared) for a more clean look
- sor update so it will broadcast and receive bfo timers to/from other players
- several updates of addons to fit to the games latest patchlevel
- new lootrollsystem (tidyroll) replaces cabal need&greed
- added twister and planb for chosen/kotbs & blorks/swordmaster
- completely reworked the bars to (hopefully) get rid of that issue with disappearing bar 3&4
- some minor changes like fixing the castbar texture (no more white line at the bottom)
- 1360x768 and 1920x1080 resolution (1920x1080 by alfonse)
- more options to chose wether you want somethings (like main assist button, careertype icons in squared etc.) visible or not.

[Aendeth]

i just found my first problem >.< since i was always a ib or wl i never used to see this but im healing on my warrior priest and when i try to res a dead person the defensive bar doesnt show up but if i click on alive person the bar shows up. got any idea what could be causing this i have only updated moth and removed cneed mod.

heres 2 ss hope they help you understand a bit

http://img156.imageshack.us/my.php?image=nirnath000.jpg
first one with my defensive bar up

http://img408.imageshack.us/my.php?image=nirnath001.jpg
http://img156.imageshack.us/my.php?image=nirnath002.jpg
and these 2 selected a dead players as u can see the ring ring around squared but no defensive target bar is coming up

[Yakar]

i just found my first problem >.< since i was always a ib or wl i never used to see this but im healing on my warrior priest and when i try to res a dead person the defensive bar doesnt show up but if i click on alive person the bar shows up. got any idea what could be causing this i have only updated moth and removed cneed mod.

heres 2 ss hope they help you understand a bit

http://img156.imageshack.us/my.php?image=nirnath000.jpg
first one with my defensive bar up

http://img408.imageshack.us/my.php?image=nirnath001.jpg
http://img156.imageshack.us/my.php?image=nirnath002.jpg
and these 2 selected a dead players as u can see the ring ring around squared but no defensive target bar is coming up

jupp, this is caused by a huduf setting, that the bar is not shown when its value is zero. if this is not set, you will get a grafic bug in v1.02 sadly.
i never had any problems with it though. i normally rezz via squared and if i rezz someone who is not in group, i do have to look at the ground and realize when i click on someone ;)
but this will be fixed with 1.03 too.

[Aendeth]

thanks for the help i just thought i would ask incase i could change something to make it work, but dont matter i will just use squared

[Wok]

Yes.

Basically you simply edit plan B and change it from bars 1,2,3 to bars 1,7,8. (Or whatever bars you want)

Bars 1,2,3,4 are being used by YakUI, so you want to avoid those.

To do so, go into your WAR folder, user directory and find PlanB. Edit the SavedVariables file. Place this in there... it will use bars 1, 7, and 8. (Edit it if you want other bars, but you'll at least see the makeup of it) I'm pretty sure theres a slash command to do the same thing, but I dont know it off hand, was added well after I had been using PlanB so didnt bother :)

PlanB.data =
{
silent = false,
active = true,
hotbar = 1,
page =
{
7,
8,
[0] = 1,
},
pagemax = 5,
}

I see - thank you very much.

[Dasensi]

i cnat gte my UI to work on test center is there gonan be a problem when 1.2patch goes live or can anyone give me a fix please ?

[Yakar]

v1.03 works mostly on testserver. all essential addons do work, some minor helpers don't work, but essentially the new version keeps the spirit of yakui on the testserver .. and of course there will be an update after the patch goes live ;)

[Demarca]

Greetings,

How do you resize the pre-set Yak frames behind the chat window / action bars / mini-map?

Also, I have a weird bug that when I'm in a warband, the default Warband window is still showing. How do you disable that?

Thanks in advance!